Product Introduction:
Category：Bluetooth RFID Scanner
Product ID：RD-BT
Views：604
Product Introduction：HF RFID reader,1D/2D barcode scanner; portable multi-functional back clip, Bluetooth RFID scanner; This device makes your phone or tablet a mobile data collector at once via Bluetooth.
Bluetooth RFID reader,1D/2D barcode scanner; portable multi-functional back clip, Bluetooth RFID scanner; This device makes your phone or tablet a mobile data collector at once via Bluetooth.
Product Features:
1. Magnetic Charging：World’s First Design
2. Convenient：Automatic Adsorption and Alignment
3. 150 hours standby time
4. >30,000 times，80 Years: 1 Charge Per Day
5. Instant Connection，No Loose
6. Adjustable Clamp, fitting to cell phone/tablet of all size;
Application:
Medical industry; Logistics; Warehouse Management; Chain Store; Mobile Payment, Meter Reading, etc.
Product Parameters:
Electrical parameters | Charging voltage | 5.0±0.25V DC | |
Nominal capacity | 1400mAh or 1500mAh Lithium Polymer Battery (> 500 Charging Ring) | ||
Standard charge current | <1A (CV constant voltage 5.0V charging) | ||
Charging time | ≤ 3 hours (BACKPOWER internal battery a charge cycle time: ~ 2.5 hours) | ||
Standby current | <50mA (Bluetooth and scan code to open standby) | ||
Working current | <200mA (sweep code current) | ||
Continuous working time | > 8 hours (1 second sweep a continuous scan code) | ||
Communication Interface | Bluetooth 2.1 SPP & HID or BT2.1 & BT4.0 | ||
2D barcode function (8 different scan engines to choose from) | Image Sensor | 752×480 CMOS | |
Illumination | Red LED 625 ± 10nm | ||
Reading system | 2D | PDF417, QR Code (QR1/2, Micro), Data Matrix (ECC200, ECC000, 050, | |
1D | Code128, UCC/EAN-128, AIM128, EAN-8, EAN-13, ISBN/ISSN, UPC-E, UPC-A, Interleaved 2 of 5, ITF-6, ITF-4, Matrix 2 of 5, Industrial 25, Standard 25, Code 39, Codabar, Code 93, Code 11, Plessey, MSI-Plessey, GS1-DataBarTM(RSS), (RSS-14, RSS-Limited, RSS-Expand) | ||
Reading accuracy | >5mil | ||
Typical reading depth of field | EAN-13 | 50mm-445mm (13mil) | |
PDF417 | 70mm-170mm (6.67mil) | ||
Code39 | 50mm-285mm(5mil) | ||
Data Matrix | 60mm-160mm (10mil) | ||
QR Code | 30mm-220mm (15mil) | ||
Symbolic contrast | ≥25% reflection difference | ||
Reading angle | Rotation 360 °, tilt ± 55 °, deflection ± 55 ° | ||
Field of view | Horizontal 36 °, vertical 23 ° | ||
Features | High Performance Low Power: Full hardware logic to quickly and easily read one-dimensional / two-dimensional bar codes in a variety of applications with only one-third of the typical power consumption of the product. LCD screen / mobile bar code recognition: Easily solve the increasingly common problem of bar code identification of mobile phones, so that products or programs to prepare more fully. Red light green bar aiming: With lighting and aiming function in a completely dark environment to quickly read the bar code target. | ||
RFID function (optional) | Frequency | 13.56MHz | |
Card reader | Read-write or auto-sensing read-only | ||
Support standards | ISO14443A standard | ||
Working distance | >30mm | ||
Working current | <100mA | ||
Standby current | <70uA | ||
Maximum power consumption | 0.33W | ||
IrDA power meter reading function (optional) | Communication technology specification | In line with DL / T 645-2007 (DL / T 645-1997) communication technical specifications | |
Infrared emission tube center wavelength | 940nm | ||
Infrared receiver tube | 38kHz modulation frequency | ||
Reading distance | >3m | ||
Transmission baud rate | 1200bps | ||
Data communication declination | 35° | ||
Working current | ≤30mA | ||
Flashlight (optional) | 1W | ||
Surroundings | Operating temperature | -20℃~55℃ | |
Storage temperature | -20℃~ +60℃ | ||
Charge temperature | 10℃~ 45℃ | ||
Working humidity | 5% to 95% (no condensation) | ||
Intelligent function | LED display | .3LED shows the state of charge and power and 1LED display Bluetooth working status. | |
Automatic power-on charging | Charging automatically when you plug in the charger No need to press any buttons | ||
Battery overcharge protection | Two-way hardware protection | ||
Battery over-discharge protection | Software and hardware dual protection | ||
Short circuit protection | Hardware protection | ||
Standard | Gold - plated magnetic charge line | ||
Back clip lanyard | |||
Warranty Card | |||
Certificate of conformity | |||
Instructions | |||
Optional | 5V / 2A & 5V / 1A two separate output high-quality car charger (indoor phone charger can be used at the same time to the mobile phone and clip clip charging, outdoor rechargeable car can be used, the car charger can also charge the plate.) | ||
Soft sets of punching metal pieces | |||
5V & 1A AC Charger | |||
Hexagon screwdriver | |||
Purse | |||
Copyright © Shenzhen Rakinda Technologies Co., Ltd. All Rights Reserved
Technical Support: 
